How to Take Drain Out of Shower in 7 Simple Steps
If you’re dealing with a clogged shower drain, you may be wondering how to take the drain out of the shower to clean it. It’s actually a pretty simple process, and we’ll walk you through it step-by-step.
Source jetstwit.com
Materials You’ll Need
Before you start, gather a few materials:
- Plumber’s wrench or adjustable wrench
- Bucket or bowl
- Hairpin or wire
- Toothbrush or small brush
- Dish soap
- Baking soda
- Vinegar
Step-by-Step Instructions
- Turn Off the Water Supply
Before you do anything else, turn off the water supply to your shower. This will prevent any water from draining out while you’re working.
- Remove the Drain Cover
Use a screwdriver or your fingers to remove the drain cover. This is usually a small, round or square cover that fits over the drain hole.
- Remove the Hair Trap
Once the drain cover is removed, you’ll see a hair trap. This is a small, cylindrical device that collects hair and other debris. Use your fingers or a pair of pliers to remove the hair trap.
- Clean the Hair Trap
Clean the hair trap by rinsing it with water and removing any hair or debris. You can also use a toothbrush or small brush to clean it.
- Remove the Drain Plug
Once the hair trap is removed, you’ll see the drain plug. This is a small, rubber or plastic plug that covers the drain hole. Use a pair of pliers to remove the drain plug.
- Clean the Drain Hole
Use a toothbrush or small brush to clean the drain hole. You can also use a mixture of dish soap and water to clean it.
- Replace the Drain Plug
Once the drain hole is clean, replace the drain plug. Make sure to push it down firmly into place.
- Replace the Hair Trap
Replace the hair trap by pushing it into place over the drain hole. Make sure to push it down firmly into place.
- Replace the Drain Cover
Replace the drain cover by pressing it into place over the drain hole. Make sure to press it down firmly into place.
- Turn On the Water Supply
Turn on the water supply to your shower and check for leaks. If you see any leaks, tighten the drain plug or hair trap until the leak stops.
Tips
- If the drain is severely clogged, you may need to use a drain cleaner. Follow the instructions on the drain cleaner label carefully.
- If you can’t remove the drain plug with a pair of pliers, you can try using a screwdriver or a hammer.
- If the drain hole is clogged with hair, you can use a hairpin or wire to remove it.
Conclusion
Taking the drain out of a shower is a simple process that can be completed in a few minutes. By following these steps, you can keep your shower drain clear and free of debris.
If you’re still having problems with your shower drain, you may want to call a plumber. They can help you diagnose the problem and find the best solution.
Check out our other articles on how to fix common household problems:
- How to Fix a Leaky Faucet
- How to Unclog a Toilet
- How to Fix a Broken Window
FAQ about How to Take Drain out of Shower
How do I remove the drain cover?
Answer: Most drain covers are held in place by screws or a turn knob. Use a screwdriver or your fingers to loosen the screws or turn the knob and lift the cover away.
How do I remove the drain strainer?
Answer: The drain strainer is usually located beneath the drain cover. Use a pair of pliers to grip the strainer and pull it straight up.
How do I unscrew the drain pipe?
Answer: The drain pipe is connected to the drain strainer. Use a wrench or your fingers to loosen the pipe and remove it.
How do I remove the old drain assembly?
Answer: The old drain assembly is usually held in place by a rubber gasket or a metal ring. Use a putty knife or a screwdriver to loosen the gasket or ring and remove the assembly.
How do I install the new drain assembly?
Answer: Insert the new drain assembly into the drain hole and tighten it by hand. Then, use a wrench to tighten the assembly further.
How do I connect the drain pipe to the drain?
Answer: Apply a thin layer of plumber’s putty to the threads of the drain pipe and screw it onto the drain. Tighten the pipe by hand, then use a wrench to tighten it further.
How do I install the drain strainer?
Answer: Insert the drain strainer into the drain assembly and tighten it by hand.
How do I replace the drain cover?
Answer: Place the drain cover over the drain assembly and tighten the screws or turn the knob to secure it.
How do I test the drain for leaks?
Answer: Pour a small amount of water into the drain and check for any leaks. If there are leaks, tighten the connections until the leaks stop.
How often should I clean the drain?
Answer: Clean the drain every few months to prevent clogs and build-up.
