Frozen pipes, worn washers, or broken handles can leave you without water when you need it most. But don’t panic! Fixing an outside water faucet is a simple task that can be completed in just a few steps.
Source thehometome.com
1. Gather Your Tools
Before you get started, gather the tools you’ll need:
- Adjustable wrench
- Flathead screwdriver
- Phillips head screwdriver
- New washer or O-ring (if needed)
- Plumber’s tape
2. Shut Off the Water Supply
Safety first! Locate the water supply valve for your outside faucet and turn it off to prevent any leaks. It’s usually near the faucet or on the side of your house.
3. Remove the Old Washer or O-Ring
Using a flathead screwdriver, gently pry out the old washer or O-ring from the faucet stem. If it’s stuck, you can use a pair of needle-nose pliers to pull it out.
4. Install the New Washer or O-Ring
Replace the old washer or O-ring with a new one. Make sure it’s the right size and shape for your faucet. Wrap a few layers of plumber’s tape around the threads of the faucet stem for extra sealing power.
5. Reassemble the Faucet
Screw the faucet stem back into the body of the faucet. Use an adjustable wrench to tighten it, but don’t overtighten. Reattach the handle and tighten it securely with a Phillips head screwdriver.
Additional Tips
- If the faucet is frozen, thaw it out with a heat gun or by wrapping it in a warm towel.
- If you’re replacing the handle, disconnect the water supply line first.
- If the leak is coming from the base of the faucet, you may need to replace the packing nut or the entire faucet.
- If you’re not comfortable working on plumbing yourself, it’s best to call a professional plumber.
Conclusion
Fixing an outside water faucet is a straightforward task that can be completed by most homeowners. By following these simple steps, you can save yourself time, money, and hassle.
For more helpful home improvement tips, check out our other articles:
FAQ about How to Fix an Outside Water Faucet
1. Why is my outside water faucet leaking?
Possible causes include: worn-out washers, damaged O-rings, loose packing nuts, or a cracked faucet body.
2. How do I turn off the water to my outside faucet?
Locate the water shut-off valve, usually inside the basement or crawl space, and turn it counterclockwise until the water stops flowing.
3. What is a washer and how do I replace it?
A washer is a rubber or plastic seal that prevents water from leaking around the faucet stem. To replace it, remove the faucet handle, packing nut, and stem, and replace the old washer with a new one.
4. What is an O-ring and how do I replace it?
An O-ring is a rubber seal that prevents water from leaking where two parts of the faucet connect. To replace it, remove the damaged O-ring and install a new one in its place.
5. How do I tighten loose packing nuts?
Use a wrench to gently tighten the packing nuts located around the faucet stem. Avoid overtightening, as this can damage the nuts.
6. What do I do if the faucet body is cracked?
If the faucet body is cracked, it cannot be repaired and must be replaced. Contact a plumber or a home improvement store for assistance.
7. How do I prevent my outside faucet from freezing?
Insulate the faucet with foam insulation or a faucet cover and drain all remaining water from the faucet and hose before winter.
8. How do I remove a frozen outside faucet handle?
Gently heat the handle with a hair dryer or a heat gun. Alternatively, wrap the handle in a warm, wet towel and let it sit for a few minutes.
9. Can I fix a dripping outside faucet myself?
Yes, most dripping faucets can be fixed by replacing washers or O-rings. However, if the leak is coming from the faucet body, it may require professional repair.
10. When should I call a plumber?
Call a plumber if the leak is substantial, the faucet body is cracked, or if you are uncomfortable with DIY repairs.